Miscellaneous: Type for chokes.  


Type Section Art.-no. Tool d d1 d2 e1 e2 l l1 m1 m2 s  
Choke Size 1
 0 51100.8 261 25,0 12,0 5,0 18,0 3,5 8,0 10,2 1,5 1,5 1,1
ChokeSize_1_51100_8_Wz261.stp
Choke Size 2
 0 51101.9 261 36,0 12,0 5,0 18,0 7,0 8,0 10,2 1,5 1,5 1,1
ChokeSize_2_51101_9_Wz261.stp
Choke Size 3
 0 51102.0 262 42,0 15,0 5,0 34,0 6,0 11,0 13,6 1,5 1,5 1,3
ChokeSize_3_51102_0_Wz262.stp
Choke Size 4
 0 51103.1 263 46,8 18,0 5,0 38,5 4,0 15,0 17,8 2,0 1,8 1,4
ChokeSize_4_51103_1_Wz263.stp
Choke Size 5
 0 51104.2 263 58,0 18,0 5,0 38,5 5,0 15,0 17,8 2,0 2,3 1,4
ChokeSize_5_51104_2_Wz263.stp
Choke Size 6
 0 51105.3 327 70,0 25,0 5,0 50,5 6,0 25,0 27,6 2,0 2,0 1,3
ChokeSize_6_51105_3_Wz327.stp
Choke Size 7
 0 51106.4 327 77,0 25,0 5,0 50,5 6,0 25,0 27,6 2,3 2,3 1,3
ChokeSize_7_51106_4_Wz327.stp
Design specification subject to change without notice. Tolerances according to DIN 16901. Difference in tolerances as well as distortion to the flange is possible because of glass fibre reinforced plastic material properties.
The data sheet can only be called up from a resolution of at least 760 pixels (tablet, PC, laptop)!