Bobbins for Laminations: Type EI 30 gSe. |
Type gSe
Type gSe - with up to 10 moulded round wire soldering pins (0.8 mm), with spacers
x3 = Number of pins available
Type | Section | Art.-no. | Tool | a | b | c | c1 | d | f | i | l | l1 | l2 | l4 | l6 | s2 | z1 | z2 | x1 | x2 | x3 | t | ||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | 26009.3 | 459/2 | 10,5 | 12,5 | 19,5 | 25,1 | 23,7 | 4,5 | 6,7 | 13,1 | 14,7 | 18,0 | 22,3 | 25,5 | 0,8 | - | - | 4×5,05 | 20,0 | 10 | 4,2 | |||
2 | 26165.2 | 459/2 | 10,5 | 12,5 | 19,5 | 25,1 | 23,7 | 4,5 | 6,7 | 13,1 | 14,7 | 18,0 | 22,3 | 25,5 | 0,8 | 6,9 | 5,1 | 4×5,05 | 20,0 | 10 | 4,2 | |||
1 | 26013.9 | 459/3 | 10,5 | 15,5 | 19,5 | 25,1 | 26,7 | 4,5 | 6,7 | 13,1 | 14,7 | 18,0 | 22,3 | 25,5 | 0,8 | - | - | 4×5,05 | 20,0 | 10 | 4,2 | |||
2 | 26166.3 | 459/3 | 10,5 | 15,5 | 19,5 | 25,1 | 26,7 | 4,5 | 6,7 | 13,1 | 14,7 | 18,0 | 22,3 | 25,5 | 0,8 | 6,9 | 5,1 | 4×5,05 | 20,0 | 10 | 4,2 | |||
Design specification subject to change without notice. Tolerances according to DIN 16901. Difference in tolerances as well as distortion to the flange is possible because of glass fibre reinforced plastic material properties. |